Toshiba XLTR-200 Manual De Usuario

 

  

40

RS485/232 Port Configuration 

 

 

• 

Edit Protocol Selection:  Menu selection 1 allows you to change 
what serial protocol is running on the selected port.  Note that not all 
ports run the same protocols.  Figure 20 shows how to change the 
protocol selection from the current setting of Metasys N2 to Modbus 
slave. 

• 

Edit Baudrate:  Menu selection 2 allows you to change the baudrate 
for the selected port.  Note that the baudrate for some protocols is 
determined by the specification, and these will therefore ignore this 
setting. 

• 

Edit Parity:  Menu selection 3 allows you to change the parity for the 
selected port.  Note that the parity for some protocols is determined by 
the specification, and these will therefore ignore this setting. 

• 

Edit address:   Menu selection 4 allows you to edit the network 
address that the selected port will respond to.  This setting is 
applicable for slave protocols only. 

• 

Edit Timeout:  Menu selection 5 allows you to edit the timeout time 
for the selected port.  Refer to section 11.2 for more information on 
timeout processing.