Toshiba XLTR-200 Manual De Usuario

 

  

42

selection, making the specific Xmodem protocol selection arbitrary.  The first 
argument of the xmodem command indicates the mode, and must be set to 
either “/crc” for Xmodem CRC mode, or “/cs” for Xmodem checksum mode. 
 
As mentioned above, configuration files can be both downloaded and uploaded.  
The second argument in the xmodem command indicates the action to take, 
and must be set to either “/d” to download the configuration file from the unit, or 
“/u” to upload a configuration file to the unit. 
 
Figure 22 shows an example of initiating an Xmodem download in CRC mode.  
Once the message “The XLTR-200 is ready to send its configuration file via 
Xmodem…Download the file now” appears, the user has 30 seconds to start 
the Xmodem download.  This can be performed in HyperTerminal by clicking 
the “receive” button (

) on the tool bar.  Figure 23 shows the dialog box that 

will appear after clicking the “receive” button.  Specify the folder in which to 
place the received file, select Xmodem as the receiving protocol, and click 
“Receive”.  One last dialog box will prompt the user to name the received file, 
and then the transfer will begin.  This will only take several seconds to 
complete, and at the conclusion the console will indicate the status of the 
transfer and return to the entry menu.