Gateway E-826R Manual De Usuario
Chapter 2: Installing and Setting Up your Autoloader
www.gateway.com
18
Installation in a 10-32 threaded-hole rack
To install the rail in a 10-32 threaded-hole rack:
1
Identify the correct mounting holes on the vertical rail, making sure that
the selected holes are on the same level.
the selected holes are on the same level.
2
Mount the front cover plate to the vertical rail in the identified holes by
using 10-32 x .625 bolts in the center two holes of the plate.
using 10-32 x .625 bolts in the center two holes of the plate.
3
Install the chassis into the rack by aligning the chassis-mounted rails with
the mounted rail assemblies, then pushing the chassis into the rack.
the mounted rail assemblies, then pushing the chassis into the rack.
4
Secure the chassis into the rack by bolting the autoloader tabs to the
upper and lower holes in the front cover plate using 10-32 x .625 bolts.
upper and lower holes in the front cover plate using 10-32 x .625 bolts.
Front cover
plate
plate
Rail
assembly
assembly
Vertical rail
Autoloader tab
(autoloader not
shown)
(autoloader not
shown)