Linksys WET11 Manual De Usuario

14

Chapter 7: Using the Wireless-B Ethernet Bridge Web-based 
Utility

The Bridge is designed to function properly after configuration using the Setup Wizard. However, if you would like 
to change these settings or make more advanced configuration changes, use your web browser and the 
Wireless-B Ethernet Bridge Web-based Utility. This chapter explains how to use the Utility.

1. Open your web browser, and enter the IP address of the Wireless-B Ethernet Bridge (the default is 

192.168.1.225). Press the Enter key, and the screen shown in Figure 7-1 will appear. In lowercase letters, 
enter the default password, admin, in the Password field. Click the OK button. You can set a new password 
on the Password screen later. 

2. The Utility’s Setup screen, shown in Figure 7-2, will appear. 

The Utility provides a convenient, web-browser-based way to alter the Bridge’s settings. It offers five main 
tabs:

•

Setup - Enables you to configure the IP address and wireless settings.

•

Password - Allows you to change the password or reset all settings to factory defaults.

•

Advanced - Lets you change the advanced wireless settings and clone a MAC address onto the Bridge.

•

Status - Displays the Bridge’s current settings.

•

Help - Provides explanations of various configuration settings and links to online technical support resources.

Have You:  Enabled TCP/IP on your PCs? PCs 
communicate over the network with this 
protocol. Refer to “Appendix D: Windows 
Help” for more information on TCP/IP.

Note: The Wireless-B Ethernet Bridge is 
designed to function properly after using the 
Setup Wizard. This chapter is provided solely 
for those who wish to perform more advanced 

configuration or monitoring.