Linksys WPC100 Manual De Usuario

Click the Wi-Fi Protected Setup 

button    to  connect  to  a  router  that  supports  Wi-Fi 

Protected  Setup.  Refer  to  the  “Wi-Fi  Protected  Setup” 

instructions  in  the “Status”  section  at  the  beginning  of 

this chapter.

Click  Refresh  to  perform  a  new  search  for 

wireless devices.

To connect to one of the networks on the list, 

select the wireless network, and click Connect.
If  the  router  does  not  support  Wi-Fi  Protected  Setup, 

proceed to the section, “No Wi-Fi Protected Setup”. If the 

router supports Wi-Fi Protected Setup  , proceed to the 

section, “Wi-Fi Protected Setup”.

If the router does not use Wi-Fi Protected Setup, proceed 

to the appropriate section, “Wireless Security Disabled” or 

“Wireless Security Enabled”.

If  you  connect  to  a  network  whose  wireless  security  is 

disabled, then you will view this screen:

Click Connect Anyway

Click 

1. 

Connect Anyway.

Click 

2. 

Finish.

Congratulations

If  you  connect  to  a  network  whose  wireless  security  is 

enabled, then you will view one of three screens.

Proceed to the appropriate instructions.

1. 

WPA2 (Wi-Fi Protected Access 2)
If  the  network  uses  WPA2  Personal  security,  then 

the  WPA2-Personal  Key  Needed  for  Connection  screen 

appears.

WPA2-Personal Security

Enter  the  network’s  Passphrase  (also 

called a pre-shared key) of 8-63 characters.
To  connect  to  the  network,  click  Connect. To  cancel 

the connection, click Cancel.
WPA (Wi-Fi Protected Access)
If  the  network  uses  WPA  Personal  security,  then 

the  WPA-Personal  Key  Needed  for  Connection  screen 

appears.

WPA-Personal Security