Linksys WPC100 Manual De Usuario

Enter  the  network’s  Passphrase  (also 

called a pre-shared key) of 8-63 characters.
To  connect  to  the  network,  click  Connect. To  cancel 

the connection, click Cancel.
WEP (Wired Equivalent Privacy)
If the network uses WEP encryption, then the WEP Key 

or Passphrase Needed for Connection screen appears. 

WEP Security

Enter the Passphrase or WEP key.

The  passphrase  is  case-sensitive  and  must  be  16  or 

fewer  alphanumeric  characters.  It  must  match  the 

passphrase  of  your  other  wireless  network  devices 

and is compatible with Linksys wireless products only. 

(For non-Linksys wireless products, enter the WEP key 

manually.)
If  you  enter  the  network’s  WEP  key,  enter  the 

appropriate number of hexadecimal characters (“0” to 

“9” and “A” to “F”). For 64-bit encryption, enter exactly 

10  hexadecimal  characters.  For  128 -bit  encryption, 

enter exactly 26 hexadecimal characters. 
To  connect  to  the  network,  click  Connect. To  cancel 

the connection, click Cancel.

Click 

2. 

Finish.

Congratulations

If you connect to a router that supports Wi-Fi Protected 

Setup, then you will view this screen:

Select a Method

Before you begin, make sure the router and the computer 

with the Adapter are in the same room. Then select the 

method that is most convenient for you.

Select this option to use 

the push button method.

Select  this  option  to  enter 

the Adapter’s PIN number on the router.

Select this option to manually enter 

the security key.
Click  Next  to  continue,  or  click  Back  to  return  to  the 

previous screen.
Proceed to the instructions for the method you selected.