Linksys FENSK05 Manual De Usuario
Windows for
Workgroups Setup
Workgroups Setup
After installing the EtherFast card hardware in you com-
puter, follow the instructions below to install the
EtherFast Card's Windows for Workgroups network
driver from the card's software disk.
puter, follow the instructions below to install the
EtherFast Card's Windows for Workgroups network
driver from the card's software disk.
Before attempting the installation, you should have your
original Windows for Workgroups disks handy.
original Windows for Workgroups disks handy.
1. Locate the Program Manager. Click on Window.
Select Network and open the Network group. Double-
click on the Network Setup icon.
Select Network and open the Network group. Double-
click on the Network Setup icon.
2. Click on the Networks button. Choose Install
Microsoft Windows Network, then click OK.
Microsoft Windows Network, then click OK.
3. In the Network Setup window, click on the Drivers
button, followed by Add Adapter.
button, followed by Add Adapter.
4. Choose the first option in the list: Unlisted or
Updated Network Adapter. Click OK.
Updated Network Adapter. Click OK.
When asked to supply a driver disk, insert the first
EtherFast disk into drive A and type a:\wfw311 into the
box on your screen. Click OK.
EtherFast disk into drive A and type a:\wfw311 into the
box on your screen. Click OK.
Linksys LNE100TX Fast Ethernet Adapter will appear
in the Network Adapter box. Click OK, followed by
Close.
in the Network Adapter box. Click OK, followed by
Close.
5. When the Network Setup window reappears, click on
the Sharing button.
the Sharing button.
33
Windows For Workgroups