Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Delta Electronics
  4. DVPEN01-SL
  5. Manual De Usuario

Delta Electronics DVPEN01-SL Manual De Usuario

Descargar
Página de 54
Ethernet Communication Module DVPEN01-SL
 
DVP-PLC Application Manual 
3
1 Introduction 
Thank you for choosing DVPEN01-SL module. To correctly install and operate DVPEN01-SL, please read 
the manual carefully before using the module. 
DVPEN01-SL is an Ethernet communication module for remote setting and communication through 
WPLSoft. DVPEN01-SL is able to send E-mails, automatically correct the RTC in DVP28SV11R/T and 
exchange data. It supports Modbus TCP communication protocol and can conduct remote monitoring by using 
SCADA (Supervisor Control And Data Acqusition) software or HMI (Human Machine Interfaces). DVPEN01-SL 
can be the master of Modbus TCP, sending out Modbus TCP instrcutions and controlling the peripheral 
equipment. In addition, under MDI/MDI-X auto-detection, it does not need to use a crossing cable. See the 
contents below for more detailed instructions on DVPEN01-SL module. 
1.1 Functions 
z
  Auto-detects 10/100Mbps transmission speed 
z
 MDI/MDI-X 
auto-detection 
z
  Supports Modbus TCP protocol (at the same time supports Master and Slave mode) 
z
  Able to send out E-mails 
z
  Auto-corrects the RTC in PLC through the Internet time correction function 
z
  Supports point-to-point data exchange (Max. data exchange length: 200 bytes) 
1.2 Specifications 
ƒ
 Internet interface
 
Item 
Specification 
Interface RJ-45 
with 
Auto 
MDI/MDIX 
Number of ports 
1 Port 
Transmission method 
IEEE802.3, IEEE802.3u 
Transmission cable 
Category 5e 
Transmission speed 
10/100 Mbps Auto-Detect 
Network protocol 
ICMP, IP, TCP, UDP, DHCP, SMTP, NTP, Modbus TCP 
ƒ
 Serial communication interface 
Item 
Specification 
Interface RS-232 
Number of ports 
1 Port 
Transmission cable 
DVPACAB230, DVPACAB215, DVPACAB2A30, DVPACAB2B10 
ƒ
 Environment 
Item 
Specification 
Noise immunity 
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge 
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV 
Analog & Communication I/O: 1KV 
Damped-Oscillatory Wave: Power Line: 1KV 
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m 
Environment  
Operation: 0°C ~ 55°C (temperature), 50 ~ 95% (humidity), Pollution degree 2;   
Storage: -25°C ~ 70°C (temperature), 5 ~ 95% (humidity)