LSI 1600 Manual De Usuario
Chapter 8 Troubleshooting
109
BIOS Boot Error Messages
Message
Problem
Suggested Solution
Adapter BIOS Disabled.
No Logical Drives
Handled by BIOS
No Logical Drives
Handled by BIOS
The MegaRAID BIOS is
disabled. Sometimes the
BIOS is disabled to
prevent booting from the
BIOS.
disabled. Sometimes the
BIOS is disabled to
prevent booting from the
BIOS.
Enable the BIOS via the
MegaRAID Configuration
Utility utility.
MegaRAID Configuration
Utility utility.
Host Adapter at Baseport
xxxx Not Responding
xxxx Not Responding
The BIOS cannot
communicate with the
adapter firmware.
communicate with the
adapter firmware.
Make sure MegaRAID is
properly installed.
properly installed.
Try moving the
MegaRAID card to
another PCI slot.
MegaRAID card to
another PCI slot.
Run the MegaRAID
Manager Diagnostics to
verify that MegaRAID is
functioning properly.
Manager Diagnostics to
verify that MegaRAID is
functioning properly.
No MegaRAID Adapter
The BIOS cannot
communicate with the
adapter firmware.
communicate with the
adapter firmware.
Make sure MegaRAID is
properly installed.
properly installed.
Move the MegaRAID
card to another PCI slot.
card to another PCI slot.
Run the MegaRAID
Manager Diagnostics to
verify that MegaRAID is
functioning properly.
Manager Diagnostics to
verify that MegaRAID is
functioning properly.
Configuration of
NVRAM and drives
mismatch.
Run View/Add
Configuration option of
Configuration Utility.
Press any key to run the
Configuration Utility.
NVRAM and drives
mismatch.
Run View/Add
Configuration option of
Configuration Utility.
Press any key to run the
Configuration Utility.
The configuration stored
in the MegaRAID adapter
does not match the
configuration stored in the
drives.
in the MegaRAID adapter
does not match the
configuration stored in the
drives.
Press a key to run
MegaRAID Manager.
MegaRAID Manager.
Choose View/Add
Configuration from the
Configure menu.
Configuration from the
Configure menu.
Use View/Add
Configuration to examine
both the configuration in
NVRAM and the
configuration stored on
the disk drives. Resolve
the problem by selecting
one of the configurations.
Configuration to examine
both the configuration in
NVRAM and the
configuration stored on
the disk drives. Resolve
the problem by selecting
one of the configurations.