Cisco Systems 7505 Manual De Usuario

H3538

Modem

Console terminal

Auxiliary 
port

Console 
port

DB-25 female

DB-25 male

RSP

The system console port on the RSP is a DB-25

receptacle DCE port for connecting a data terminal,

which allows you to configure and manage the

system. The console port is labeled Console.

Connect the console cable from the

terminal to the console port on the RSP.

Check your terminal’s documentation to

determine the baud rate of the terminal

you will be using.

The baud rate of the terminal you are using

must match the default baud rate (9600 baud).

Set up the terminal as follows: 9600 baud,

8 data bits, no parity, and 2 stop bits

(9600, 8N2).

The auxiliary port on the RSP is an ETA/TIA DTE

DB-25 plug to which you can attach external

equipment in order to access the router from the

network. The port is located next to the console port

on the RSP and is labeled AUX.

Connect the cable from the auxiliary

device to the auxiliary port on the RSP.

Check your terminal’s documentation to

determine the baud rate of the terminal.

The baud rate of the terminal must match the

default baud rate (9600 baud).

Set up the terminal as follows: 9600 baud,

8 data bits, no parity, and 2 stop bits

(9600, 8N2).