Cisco Systems 7505 Manual De Usuario

The Cisco 7505 router supports AC-input and DC-input power supplies. The power supply is already installed

in the router when you receive it. You connect the power to it.

The AC-input power supply is the shipped as the default if no power supply is specified at the time of

purchase.

Push the cable retention clip away from the power supply receptacle, and push the power cable in

until the cable retention clip snaps into place.

Connect the opposite end of the power cable to an appropriate power source.

Turn off the power source. Locate the circuit breaker on the panel board that services the DC circuit,

and switch it off, then tape the switch handle of the circuit breaker in the off position.

AC receptacle

On/off switch

Cable retention 
clip

DC OK  LED

H1998

DC OK  LED

Terminal block
(cover removed)

H9713

On/off switch