Cisco Systems uBR10-LCP2-MC16E Manual De Usuario

The default modulations are:

64 quatrature amplitude modulations (QAM) for downstream.

quadrature amplitude phase-shift keying (QPSK) for upstream.

Cisco cable interface line cards are configured in a number of different upstream combinations based on 
the card used, your cable network, and the anticipated subscription and service levels. 

 lists the 

data rates and modulation schemes for both DOCSIS and EuroDOCSIS standards.

The Cisco uBR10-LCP2-MC16C cable interface line card output is +42 dBmV +/– 3 dB and supports 
all DOCSIS upstream channel widths described in 

. The card is configured identically to the 

Cisco uBR-MC16C cable interface line card.

The configuration information for the Cisco uBR10-LCP2-MC16C is the same as the information for the 
Cisco uBR10-LCP2-MC28C/Cisco uBR-MC28C, except that there are fewer upstream and downstream 
ports. Refer to the configuration guides.

For Cisco IOS software requirements see the 

.

For configuration information, refer to Configuring the Cisco uBR-MC28C Cable Modem Card, 
available on the documentation CD-ROM and Cisco.com at the following URL:

Refer to the Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide at the 
following URL:

3.2 MHz

16 QAM(4)
QPSK (2)

2.56 M

10.24
5.12

9.0
4.6

1.6 MHz

16 QAM(4)
QPSK (2)

1.28 M

5.12
2.56

4.5
2.3

800 kHz

16 QAM(4)
QPSK (2)

640 k

2.56
1.28

2.3
1.2

400 kHz

16 QAM(4)
QPSK (2)

320 k

1.28
0.64

1.2
0.6

200 kHz

16 QAM(4)
QPSK (2)

160 k

0.64
0.32

0.6
0.3