Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. uBR10-LCP2-MC16E
  5. Manual De Usuario

Cisco Systems uBR10-LCP2-MC16E Manual De Usuario

Descargar
Página de 32
8
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Card for the Cisco uBR10012 Router
OL-2872-02
  Cisco uBR10-LCP2-MC16C/MC16E/MC16S Overview
 shows the faceplate for the Cisco uBR10-LCP2-MC16S cable interface line card. 
Figure 6
Cisco uBR10-LCP2-MC16S Faceplate
The Cisco uBR10-LCP2-MC16S cable interface line card has one downstream port and six upstream 
ports. The upstream ports are labeled US0 through US5. The downstream port is labeled DS. There are 
six LEDs labeled MGR ACT (manager active) next to each upstream port. See 
of the LCP2 adapter card LEDs and 
 for descriptions of the cable interface line card 
LEDs and their functions.
Cisco uBR10-LCP2-MC16x LEDs
Both the Cisco uBR10-LCP2 adapter card and the cable interface line card have their own set of status 
LEDs on the front of the module. The Cisco uBR10-LCP2 adapter card LEDs are described in 
. 
The Cisco uBR-MC16x cable interface line cards LEDs are described in 
 describes the LCP2 adapter card LEDs and their functions. 
 describes the cable interface line card LEDs and their functions. 
62827
MGR 
AC
T
US0
MGR 
AC
T
US1
MGR 
AC
T
US2
MGR 
AC
T
US3
MGR 
AC
T
US4
MGR 
AC
T
US5
DS
uBR - MC16S
+42 dBmV
ENABLED
Table 3
Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED
Status
Description
Power
Green
Off
Indicates that the power is being supplied to the Cisco uBR10-LCP2.
Power is off.
Status 
Status LED on N+1 or 
redundant card in chassis
Yellow
Green
Blinking Green
Indicates that the Cisco uBR10-LCP2 is in the boot up process, is in self 
test mode, or is downloading code.
Indicates that the Cisco uBR10-LCP2 has successfully completed the 
boot, the self test, and the code download process.
Indicates that the board is in standby or protect card mode.
Maintenance
Off
Yellow
Normally off to indicate that there is no maintenance action required. 
Indicates that it is safe to remove the entire assembly (Cisco uBR10-LCP2 
adapter card and Cisco uBR-MC16x cable interface line card) from the 
chassis.
Table 4
Cisco uBR-MC16x Cable Interface Line Card LEDs and Their Functions
LED
Status
Description
Enables
Green
Off
Cable interface line card is operating normally, is receiving DC power from the router 
midplane, and is configured for operation. 
Either the card is shut down or the slot is not working.
Upstream
Green
Off
Upstream path is enabled and configured (each upstream port). 
Either the port is not properly configured or is shut down, or the slot is not working.