Cisco Systems RV130W Manual De Usuario

Configuring Access Rules

Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide

89

 

The Access Rules page allows you to configure the default outbound policy for 
the traffic that is directed from the secure network (LAN) to the non-secure 
network (dedicated WAN/optional). 

The default inbound policy for traffic flowing from the non-secure zone to the 
secure zone is always blocked and cannot be changed. 

Internet access policies override access rules, when both are configured on the 
device.

To configure the default outbound policy:

Choose Firewall > Access Rules.

Choose Allow or Deny.

Note: Ensure that IPv6 support is enabled on the device to configure an IPv6 
firewall. See 

.

Click Save.

The order in which access rules are displayed in the access rules table indicates 
the order in which the rules are applied. You may want to reorder the table to have 
certain rules applied before other rules. For example, you may want to apply a rule 
allowing certain types of traffic before blocking other types of traffic.

To reorder access rules:

Choose Firewall > Access Rules.

Click Reorder.

Check the box in the row of the rule that you want to move up or down and click 
the up or down arrow to move the rule up or down one line, or select the desired 
position of the rule in the drop-down list and click Move to.

Click Save.