Cisco Systems RV130W Manual De Usuario
Configuring the Firewall
Configuring Access Rules
Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide
90
5
Adding Access Rules
All configured firewall rules on the device are displayed in the Access Rules
Table. This list also indicates whether the rule is enabled (active) and gives a
summary of the From/To zone as well as the services and users the rule affects.
Table. This list also indicates whether the rule is enabled (active) and gives a
summary of the From/To zone as well as the services and users the rule affects.
To create an access rule:
STEP 1
Choose Firewall > Access Rules.
STEP 2
Click Add Row.
STEP 3
In the Connection Type field, choose the source of originating traffic:
•
Outbound (LAN > WAN)—Choose this option to create an outbound rule.
•
Inbound (WAN > LAN)—Choose this option to create an inbound rule.
•
Inbound (WAN > DMZ)—Choose this option to create an inbound rule.
STEP 4
From the Action drop-down menu, choose the action:
•
Always Block—Always block the selected type of traffic.
•
Always Allow—Never block the selected type of traffic.
•
Block by schedule—Blocks the selected type of traffic according to a
schedule.
schedule.
•
Allow by schedule—Allows the selected type of traffic according to a
schedule.
schedule.
STEP 5
From the Services drop-down menu, choose the service to allow or block for this
rule. Choose All Traffic to allow the rule to apply to all applications and services,
or choose a single application to block:
rule. Choose All Traffic to allow the rule to apply to all applications and services,
or choose a single application to block:
•
Domain Name System (DNS), UDP or TCP
•
File Transfer Protocol (FTP)
•
Hyptertext Transfer Protocol (HTTP)
•
Secure Hypertext Transfer Protocol (HTTPS)
•
Trivial File Transfer Protocol (TFTP)
•
Internet Message Access Protocol (IMAP)
•
Network News Transport Protocol (NNTP)