Cisco Systems 3825 Manual De Usuario

Descargar
Página de 358
       
4-4
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 4      Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line 
    Clocking Requirements for Cisco 3825 Router
Clock Source Command
The clock source command configures the source for synchronization of the interface transmit clock.
Configure clock source line if the router is deriving its clock externally from the connected device.
Configure clock source internal if the router provides the master clock (for example, either the internal 
clock or the network clock).
The show network-clocks command allows verification of the clocking configuration.
mwr2#sh network-clocks
  Network Clock Configuration
  --------------------------- 
  Priority      Clock Source    Clock State     Clock Type 
     1          E1 0/0/0 
GOOD            E1          
    10          Backplane       GOOD            PLL         
  Current Primary Clock Source
  --------------------------- 
  Priority      Clock Source    Clock State     Clock Type 
     1          E1 0/0/0 
GOOD            E1          
The previous output of show network-clocks corresponds to the following configuration (see 
for description of how the clocking is done):
no network-clock-participate slot 1
  network-clock-participate wic 0
  network-clock-participate wic 1
  network-clock-participate wic 2
  no network-clock-participate aim 0
  no network-clock-participate aim 1
  network-clock-select 1 E1 0/0/0
  controller E1 0/0/0
   clock source line
   channel-group 0 timeslots 1-31 speed 64
Figure 4-2
Clocking Example
1.
The BSC provides clock synchronization to the MWR_A router. 
2.
The MWR_A router receives clock from the BSC via port 0/1/0 and distributes to port 0/0/0. 
3.
The MWR_B router receives clock from the MWR_A router via port 0/0/0 and distributes to port 
0/1/0. 
4.
The Base Transceiver STATION (BTS) receives clock synchronization from the MWR_B router. 
5.
The clock synchronization from the BSC is propagated through the network to the BTS.
Clocking ----------------------------------------------->
0/1/0         0/0/0      0/0/0      0/1/0 
BSC---z___MWR_A---z___MWR_B---z____BTS
92854