Cisco Systems WAP4410N Manual De Usuario
Configuring the WAP4410N Wireless-N Access Point
Configuring Status Settings
WAP4410N Wireless-N Access Point with Power Over Internet
61
6
To manage the configuration for the access point, follow these steps:
STEP 1
Click Administration > Config Management.
STEP 2
To create a backup configuration file, click Save Configuration to File and follow
the on-screen instructions.
the on-screen instructions.
STEP 3
To restore the configuration of your access point:
a. Make sure that the configuration file for the access point is on your computer.
b. In the Restore Configuration field, enter the location of the configuration file or
click Browse and locate the configuration file.
c. Click Load.
Configuring Status Settings
This section describes how to change the status settings for the access point:
•
•
•
Checking Local Network Status
The Status > Local Network page displays the access point’s current status
information for the local network.
information for the local network.