Cisco Systems UBR924 Manual De Usuario

This page summarizes how the Cisco uBR924 router has been configured at the MAC (physical) layer. 

 shows a typical CPE State Information page. 

The following information is shown in the CPE State Information page:

Router Name—Shows the hostname assigned to the router. 

IP Address—Shows the IP address assigned to the router’s cable interface. 

Net Mask—Shows the subnet mask for the cable interface.

MAC State—Indicates the current MAC layer state (during normal operation, this is 
“maintenance_state”). The following are the possible MAC layer states; they correspond to the 
states shown in the 

 page:

wait_for_link_up_state—Wait for Link Up state

ds_channel_scanning_state—Downstream Channel Scanning state

wait_ucd_state—Wait for UCD state

wait_map_state—Wait for MAP state

ranging_1_state—Ranging 1 state