Cisco Systems UBR924 Manual De Usuario

When the Cisco uBR924 router is operating in routing mode, the configuration of an H.323v2 static dial 
map uses the same commands as those given in the 

. The only difference is that calls can terminate and originate on the Ethernet interface, which 

is not possible in DOCSIS-bridging mode.

The following sample configuration shows a Cisco uBR924 router set up for a static H.323v2 dial map 
with the following characteristics:

Local dial peer 1 specifies that voice port V1 is connected to a telephone or fax machine with the 
number 6101.

Local dial peer 2 specifies that voice port V2 is connected to a telephone or fax machine with the 
number 6102. 

Remote dial peer 101 specifies that calls to numbers 6200–6299 should be routed to IP address 
10.1.71.62.

Remote dial peers 102 and 103 specify that calls to numbers 6101 and 6102 should be routed to IP 
address 24.1.61.5, which is the IP address for the Cisco uBR924 router’s Ethernet interface. This 
allows the router to complete calls between voice ports V1 and V2. 

The commands related to the dial map are in bold.

version 12.1

no service pad

service timestamps debug uptime

service timestamps log uptime

!

hostname ubr924

!

!

!

class-map class-default

 match any 

!

!

!

clock timezone - 3

ip subnet-zero

!

!

!

!

voice-port 0

!

voice-port 1

!

 dtmf-relay cisco-rtp