Cisco Systems CISCO7201 Manual De Usuario
4-16
Cisco 7201 Installation and Configuration Guide
OL-11364-04
Chapter 4 Replacing Cisco 7201 Field-Replaceable Units
Removing and Installing a DIMM
Step 5
Remove the Cisco 7201 router from the rack, if it is rack-mounted.
Figure 4-13
Removing the Cover
Step 6
Turn the Cisco 7201 so that the back is facing you.
Step 7
Using a Phillips screwdriver, loosen the fifteen cover screws holding the cover to the chassis.
Step 8
Lift the cover off the router.
Proceed to the following sections for replacement instructions:
•
•
Removing and Installing the DIMM
The information in this section provides instructions for replacing the DDR-SDRAM DIMM and is
included for future use. The memory configuration you ordered is installed in the Cisco 7201 router.
included for future use. The memory configuration you ordered is installed in the Cisco 7201 router.
Warning
During these procedures, wear grounding wrist straps to avoid ESD damage to the card. Do not
directly touch the backplane with your hand or any metal tool, or you could shock yourself.
directly touch the backplane with your hand or any metal tool, or you could shock yourself.
Statement 94
1
Cover screws
170954
PWR
SLO
T
2
PWR
SLO
T
1
PWR
SLO
T
1 OK
THIS UNIT M
AY HAVE M
ORE THAN O
NE POWER S
UPPLY CON
NECTION. A
LL CONNEC
TIONS MUST
BE REMOVE
D TO DE-ENE
RGIZE THE U
NIT
PWR
SLO
T
2 OK
1