Cisco Systems CISCO7201 Manual De Usuario
A-6
Cisco 7201 Installation and Configuration Guide
OL-11364-04
Appendix A Specifications
Gigabit Ethernet RJ-45 Port Pinouts
For related documentation, see the following documents:
•
Cisco SFP Optics for Gigabit Ethernet Applications Data Sheet
•
Cisco 1000BASE-T SFP Data Sheet
Gigabit Ethernet RJ-45 Port Pinouts
The Cisco 7201 router has RJ-45 ports for the two 10/100/1000 Gigabit Ethernet/Fast Ethernet/Ethernet
connections. In addition, the Cisco 7201 router has an RJ-45 Fast Ethernet Management port. The RJ-45
ports support IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant
with 10BASET, 100BASETX, and 1000BASET specifications.
connections. In addition, the Cisco 7201 router has an RJ-45 Fast Ethernet Management port. The RJ-45
ports support IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant
with 10BASET, 100BASETX, and 1000BASET specifications.
The RJ-45 ports support standard straight-through and crossover Category 5 UTP cables with RJ-45
connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.
connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
shows an RJ-45 port and connector.
lists the pinouts and signals for the RJ-45
port.
Figure A-1
RJ-45 Port and Connector
6.
For fiber types 50/125
µ
m, NA = 0.20 fiber and 62.5/125
µ
m, NA = 0.275 fiber.
7.
For fiber types 50/125
µ
m MMF and 62.5/125
µ
m MMF.
1
RJ-45 connector
Table A-11
RJ-45 Receptacle Pinouts
Pin
FE Signal
GE Signal
1
TX DATA+
1
Tx A+
2
TX DATA–
Tx A–
3
RX DATA+
2
Rx B+
4
N/C
Tx C+
5
N/C
Tx C–
57574
12345678
1