Cisco Systems Cisco 3600 Manual De Usuario

3-14

Cisco 3600 Series Routers Hardware Installation Guide

OL-2056-05

Chapter 3 Installing the Router

Installing the Chassis

Mounting the Router in the Rack

After you attach the brackets to the router, slide the router into the rack in the position shown in one of
the following illustrations. Using your own screws, fasten the chassis to the rack.

Warning

To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed
to support the weight of the unit. Statement 1032

Figure 3-23

through

Figure 3-25

show the Cisco 3640 router in a standard 19-, 23-, or 24-inch rack. The

procedure is the same for the Cisco 3620 router.

Figure 3-26

through

Figure 3-29

show the Cisco 3631 and Cisco 3660 router in a standard 19- or 23-inch

rack.

Figure 3-23 Mounting the Cisco 3620 or Cisco 3640 Router (19-Inch Rack with a 17.5-Inch Opening)

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:

•

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

•

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.

•

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
the rack.

Statement 1006

Note: The second bracket attaches to the rack at the other side of the chassis.

The brackets can also be installed with the front panel forward.

26328

19-inch rack