Cisco Systems Cisco 3600 Manual De Usuario
3-44
Cisco 3600 Series Routers Hardware Installation Guide
OL-2056-05
Chapter 3 Installing the Router
Connecting to a Console Terminal or Modem
Connecting to the Console Port
To connect a console terminal or a PC running terminal emulation software to the console port on the
router, perform the following procedure:
router, perform the following procedure:
Step 1
Use the blue RJ-45-to-DB-9 console adapter cable to connect the router to a terminal. (See
through
.)
For information about console port pinouts, refer to the
document available online and on the Documentation CD-ROM.
Note
On the Cisco routers, the console port is color-coded blue.
Step 2
Configure your terminal or terminal emulation software for 9600 baud, 8 data bits, no parity, and 2 stop
bits.
bits.
Note
Because hardware flow control is not possible on the console port, Cisco does not recommend that
modems be connected to the console port. Modems should be connected only to the auxiliary port.
modems be connected to the console port. Modems should be connected only to the auxiliary port.
Figure 3-57 Connecting a Console Terminal to a Cisco 3620 Router
0
ACTIVE
READY
1
SYSTEM
CON
AUX
RPS
PCMCIA
1
0
H7239
Console port
connector (RJ-45)
RJ-45-to-RJ-45
rollover cable
RJ-45-to-DB-9 or
RJ-45-to-DB-25 adapter
Laptop computer