Cisco Systems IPMUX-1E Manual De Usuario
Appendix E Configuration Menus
IPmux-1/1E Installation and Operation Manual
E-10 General
Configuration
Table E-3. Authentication/Community Parameters
Parameter Possible
Values
Remarks
Authentication
Failure Trap
On
Off
Off
On – an authentication-failure trap is generated
when a system manager attempts to set a
parameter within IPmux-1/1E with an incorrect
parameter within IPmux-1/1E with an incorrect
community value
Trap
Up to 10 alphanumeric characters The entry is case-sensitive
Read
Up to 10 alphanumeric characters The entry is case-sensitive
Write
Up to 10 alphanumeric characters The entry is case-sensitive
Manager List
The Manager List window parameters are used when IPmux-1 inband
management capability is used. The parameters define the parameters for up to
eight managers. These parameters are:
• Manager IP address
• Host index
management capability is used. The parameters define the parameters for up to
eight managers. These parameters are:
• Manager IP address
• Host index
In addition, the Manager List window parameters configure the traps to be
received by a manager. The default for all traps is Off.
received by a manager. The default for all traps is Off.
To access additional manager-list parameters:
• Press <N> to go to the next Manager List window.
• Press <N> to go to the next Manager List window.
MANAGER LIST
1. Manager IP Address
192.333.234.172
2. Link Up/Down Trap
On
3. Alarm Trap
On
5. VLAN Tagging
6. VLAN ID
7. VLAN Priority
ESC. Exit
S. Save
N. Next
Select item from the menu.
Use <Esc> key or keys <1> to <3>
Figure E-14. Manager List Menu
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
2. Management
Configuration
↓
2. Manager
List