Cisco Systems IPMUX-1E Manual De Usuario
Chapter 1 Introduction
IPmux-1/1E Installation and Operation Manual
1-2
Overview
• IPmux-1E with E1 interface and an echo canceller
Balanced line with an RJ-45 connector
Unbalanced line with a mini-coaxial connector (TBNC)
• IPmux-1E with T1 interface and an echo canceller
Balanced line with an RJ-45 connector
Unbalanced line with a mini-coaxial connector (TBNC).
An external clock port is optional for IPmux-1/1E (Ordering options).
A user Ethernet interface is optional for IPmux-1/1E (Ordering options).
A user Ethernet interface is optional for IPmux-1/1E (Ordering options).
Options
IPmux-1/1E is a 1U high, easy-to-install standalone unit. A rack mount installation
option is available: RM-25 for IPmux-1, and RM-26 for IPmux-1E.
IPmux-1 can be ordered with AC or DC power supply. IPmux-1E is only available
with AC power supply.
option is available: RM-25 for IPmux-1, and RM-26 for IPmux-1E.
IPmux-1 can be ordered with AC or DC power supply. IPmux-1E is only available
with AC power supply.
Applications
Typical IPmux-1/1E applications are shown with E1/T1, ISDN, and FXS/FXO/E&M
interfaces.
illustrates
Multiplexing Voice and Data over an Ethernet link.
shows an
E1/T1 circuit extension over an IP/Ethernet Network.
illustrates mixed ISDN BRI and POTS support application of
V5.1
concentration of ISDN BRI remote terminals.
shows mixed ISDN BRI and POTS support application of
Voice
Concentration.
illustrates
extending ISDN BRI ports and LAN of a Small Office.
shows Ethernet-based multi-tenant with voice and data integrated
access.
E1/T1
IPmux-1
PBX
SITE B
10/100 Mbps
10/100 Mbps
E1/T1
IPmux-1
PBX
SITE A
IP/Ethernet
Network
Figure 1-1. Multiplexing Voice and Data over an IP/Ethernet Link