Cisco Systems UBR7100E Manual De Usuario

The rack-mount and cable-management kit for Cisco uBR7100 series routers consists of rack-mount 
brackets and a cable-management bracket that are designed for mounting your router in 19-inch, 
four-post or telco-type equipment racks. The kit is shipped with each Cisco uBR7100 series router and 
is also available as a single FRU. 

Rubber feet for tabletop installation are included in the accessory kit that shipped with your router. 
Hardware for mounting the router in a 23- or 24-inch rack is available separately. The product number 
for this kit is ACS-7100-RMK=. 

For detailed instructions about how to install the rack-mount and cable-management brackets on your 
Cisco uBR7100 series router, see the 

. 

The following sections provide a functional overview of Cisco uBR7100 series routers to help you 
become familiar with the capabilities of the router:

In Cisco uBR7100 series routers, the slot number is the location in the chassis where the interface resides 
and the port number is the physical port associated with that slot. Cisco uBR7100 series router slots are 
numbered 0 through 5. Interfaces in the Cisco IOS software are identified by a type, slot number, and 
port number. The number of physical ports depends on the type of modular port adapter or fixed 
interface. For example, Fast Ethernet 0/1 indicates port 1 on the fixed LAN interface in slot 0. 

Slots in the Cisco uBR7100 series are numbered as follows:

Slot 0—Fixed LAN (Fast Ethernet) interface 

Slot 1—Fixed RF interface

Slot 3—Modular port adapter

Slots 2, 4, and 5 are not used on the Cisco uBR7100 series router.

 illustrates the slot placement on Cisco uBR7114 and Cisco uBR7114E routers. The 

placement on the Cisco uBR7111 and Cisco uBR7111E routers is identical.