Cisco Systems IGX 8400 Manual De Usuario
Trunk Cards 4-23
UXM-E Interface Cards
Summary Statistics
You can view summary statistics for a UXM-E trunk through Cisco WAN Manager or the CLI. The
CLI commands are dspportstats and dsptrkstats.
CLI commands are dspportstats and dsptrkstats.
With dspportstats, you can view:
•
Port statistics
•
IMA statistics
•
ILMI/ILMI statistics
With dsptrkstats, you can view:
•
Qbin statistics
•
Gateway statistics
•
Virtual interface statistics
UXM-E Interface Cards
This section provides basic information on the interface back cards for the UXM-E. The information
consists of a general description, an illustration of the card faceplate, and a table describing the
connectors and status LEDs. For details on the line technology of each type of interface, see the
appendix “System Specifications.”
consists of a general description, an illustration of the card faceplate, and a table describing the
connectors and status LEDs. For details on the line technology of each type of interface, see the
appendix “System Specifications.”
Note
The T1 and E1 back cards do not have Active and Fail LEDs to indicate card status (rather
than the port status indicated by the tri-color LEDs). If a T1 or E1 back card failure is detected, all
of the tri-color LEDs turn red.
of the tri-color LEDs turn red.
The model numbers of the back cards and the order of their appearance are:
•
BC-UAI-4-155-MMF
•
BC-UAI-4-155-SMF
•
BC-UAI-2-155-SMF
•
BC-UAI-2-SMFXLR
•
BC-UAI-4-SMFXLR
•
BC-UAI-4-STM1E
•
BC-UAI-6-T3
•
BC-UAI-3-T3
•
BC-UAI-8-T1-DB-15
•
BC-UAI-4-T1-DB-15
•
BC-UAI-6-E3
•
BC-UAI-3-E3
•
BC-UAI-8-E1-DB-15
•
BC-UAI-8-E1-BNC
•
BC-UAI-4-E1-DB-15