Cisco Systems IGX 8400 Manual De Usuario

Descargar
Página de 46
4-24 Cisco IGX 8400 Series Reference
UXM-E Interface Cards
BC-UAI-4-E1-BNC
OC-3/STM1 Back Cards
The OC3/STM1 back cards for the UXM-E have the single-mode fiber (SMF), multimode fiber
(MMF) and electrical connections. The cards are:
BC-UAI-2-155-SMF
BC-UAI-4-155-SMF
BC-UAI-4-155-MMF
BC-UAI-2-SMFXLR
BC-UAI-4-SMFXLR
BC-UAI-4-STM1E
As indicated by the “2” or the “4” in the model number, these cards have two or four transmit and
receive connectors. Each line has a tri-color LED whose color indicates its status. Each card also has
a red Fail LED and a green Active LED to indicate the status of the card. Table 4-12 lists the
connectors and LEDs. Figure 4-11 shows the four-port OC3/STM1 card. The SMF, STM1E,
SMFXLR, and MMF versions appear the same. Figure 4-12 shows the two-port OC3/STM1 card.
For technical data on OC3/STM1 lines, see the appendix “System Specifications.”
Table 4-12
Connectors and LEDs for SMF and MMF Back Cards
Connector/Indicator
Function
Transmit and receive
SC connector for SMF and MMF
Red (on the tri-color LED)
On indicates line is active but a local alarm was detected.
Yellow (on the tri-color LED)
On indicates line is active but a remote alarm was detected.
Green (on the tri-color LED)
On indicates line is active.
Fail light (red)
An error was detected. Reset the card with resetcd f to clear it. If Fail
comes on again, call the TAC through Cisco Customer Engineering.
Active light (green)
The card is active and in service.