Cisco Systems OL-31454-01 Manual De Usuario

If you have two power supplies, install the second power supply in the available slot and repeat Step 1 
through Step 10. 

You can protect the Cisco CGR 2010 router terminal block from exposure with the terminal block cover. 
See 

The terminal block cover is intended to protect against inadvertent contact with the exposed terminals 
of the input terminal block. The terminal block cover does not comply with the safety standard 
requirements for enclosures. Consequently, even with the terminal block cover installed, the CGR 2010 
router still needs to be located in a restricted access location, accessible only by trained service personnel 
who recognize the hazards in that environment and are trained to take the necessary precautions.

To attach the CGR 2010 terminal block cover, access the router’s cable side.

Locate the terminal blocks on the left side of the chassis.

To secure the terminal block cover, first insert the two clips on the right side, then insert the single clip 
on the left side, as shown in 

.

You can funnel cables into the terminal block through the cable routing holes on the left side of the cover.

239194