Cisco Systems OL-11291-01 Manual De Usuario
3-33
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 3 Using IPM to Measure Network Performance
Measuring Network Performance for TCP
Measuring Network Performance for TCP
IPM’s TCP Connect operation measures round-trip latency between a source and any IP-enabled device
running TCP services. Latency is computed by measuring the time taken by the source to perform a TCP
connect operation to the target device. This operation is useful for simulating Telnet or HTTP connection
times. The TCP operation also measures availability and errors for TCP services.
running TCP services. Latency is computed by measuring the time taken by the source to perform a TCP
connect operation to the target device. This operation is useful for simulating Telnet or HTTP connection
times. The TCP operation also measures availability and errors for TCP services.
You can specify any port number, well known or otherwise, on any IP host, Cisco or non-Cisco, as long
as someone is listening on that port on the target. A well known port is a port number less than or equal
to 1024 (for example, 21 for FTP, 23 for Telnet, and 80 for HTTP). IPM provides default TCP
Connection operations for several of these common TCP services.
as someone is listening on that port on the target. A well known port is a port number less than or equal
to 1024 (for example, 21 for FTP, 23 for Telnet, and 80 for HTTP). IPM provides default TCP
Connection operations for several of these common TCP services.
To measure end-to-end latency for TCP:
Step 1
Define a device as the source device from which to measure performance. For details on defining a
source device, see
source device, see
Step 2
Define a device as the target of connection requests from the source device. For details on defining a
target, see
target, see
.
To control how statistics are collected, use one of the default operations for TCP or define your own TCP
operation. For details on defining a TCP operation, see
operation. For details on defining a TCP operation, see
Step 3
Define a collector to measure performance between the source router and target you defined. For details
on defining a collector, see
on defining a collector, see
. If you set the collector’s schedule to On Demand, start
the collector when needed.
Step 4
View the statistics in the TCP Historical Statistics window. For details on viewing end-to-end statistics
for TCP, see
for TCP, see
Defining a TCP Operation
IPM provides several default TCP operations for measuring performance between a source and target.
In addition, IPM provides the option to create, modify, or delete your own TCP operations from the TCP
Operation Configuration window.
In addition, IPM provides the option to create, modify, or delete your own TCP operations from the TCP
Operation Configuration window.
To define a TCP operation:
Step 1
From the IPM Main Window, select Edit > Configuration.
The Configuration window appears.
Step 2
Click Operation.
The Operation Configuration window appears within the Configuration window.
Step 3
Click TCP Connect
The TCP Operation Configuration window (
) appears.