Cisco Systems ASR 1000 Series Manual De Usuario
5-11
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 5 Cisco ASR 1004 Router Overview and Installation
Attaching the Chassis Rack-Mount Brackets
Step 4
Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount
brackets to the chassis.
brackets to the chassis.
Step 5
Install the chassis in a rack. To install the Cisco ASR 1004 Router in a rack, go to
.
This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1004 Router.
Chassis Rear Rack-Mount Brackets
If you are rack mounting the chassis using the rear rack-mount brackets, then this type of installation
provides for the chassis being recessed in the rack.
provides for the chassis being recessed in the rack.
To install the front rack-mount brackets on a Cisco ASR 1004 Router, complete the following steps:
Step 1
Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear t rack-mount
bracket with the ear and holes facing outward and towards the rear of the chassis (see
bracket with the ear and holes facing outward and towards the rear of the chassis (see
).
shows where to attach the rear rack-mount brackets to the Cisco ASR 1004 Router.
Figure 5-8
Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1004 Router
Step 2
Position the rear rack-mount bracket top hole with the chassis second top hole from the back (See
).
Step 3
Insert and tighten the five screws on one side.
1
Rear rack-mount bracket ear and holes
3
Rear rack-mount bracket components that
slide into rear bracket that is attached to the
chassis
slide into rear bracket that is attached to the
chassis
2
Rear rack-mount bracket (first bracket to
attach to chassis)
attach to chassis)
4
Rear rack-mount bracket screws
280175
1
1
0
3
4
1
2