Cisco Systems ASR 1000 Series Manual De Usuario
6-16
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 6 Cisco ASR 1002 Router Overview and Installation
Attaching the Chassis Rack-Mount Brackets
Step 5
Install the chassis in a rack. To install the Cisco ASR 1002 Router in a rack, go to the
.
This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1002 Router.
Chassis Rear Rack-Mount Brackets
If you are rack mounting the chassis using the rear rack-mount brackets, then this type of installation
provides for the chassis being recessed in the rack.
provides for the chassis being recessed in the rack.
To install the rear rack-mount brackets on a Cisco ASR 1002 Router, complete the following steps:
Step 1
Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear rack-mount
bracket with the ear and holes facing outward and towards the rear of the chassis.
bracket with the ear and holes facing outward and towards the rear of the chassis.
shows where to attach the rear rack-mount brackets to the Cisco ASR 1002 Router.
Figure 6-11
Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1002 Router
Step 2
Position the rear rack-mount bracket top hole with the chassis top hole from the back.
Step 3
Insert and tighten the screws on one side.
Step 4
Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the
rear rack-mount brackets to the chassis.
rear rack-mount brackets to the chassis.
This completes the steps for attaching the rear rack-mount brackets to the Cisco ASR 1002 Router.
Caution
To make installation easier, before you mount the ASR 1002 Router in a rack, make certain you read
which rack-mount bracket ear holes to use when positioning the chassis in the rack. As a result of using
the designated ear holes on the rack-mount bracket, the cable-management bracket installation will be
made easier.
which rack-mount bracket ear holes to use when positioning the chassis in the rack. As a result of using
the designated ear holes on the rack-mount bracket, the cable-management bracket installation will be
made easier.
1
Rear rack-mount bracket ear and holes
3
Rear rack-mount bracket screws
2
Rear rack-mount bracket
280279
2
3
1