Cisco Systems ASR 1000 Series Manual De Usuario
3-8
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 3 Preparing Your Site for Installation
Site Planning
•
Position system cables and power supply cables carefully. Route system cables and the power supply
cable and plug so that they cannot be stepped on or tripped over. Be sure that nothing else rests on
your system component cables or power cable.
cable and plug so that they cannot be stepped on or tripped over. Be sure that nothing else rests on
your system component cables or power cable.
•
Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
modifications. Always follow your local and national wiring rules.
modifications. Always follow your local and national wiring rules.
•
If you turn off your system, wait at least 30 seconds before turning it on again to avoid system
component damage.
component damage.
Site Selection Guidelines
The Cisco ASR 1000 Series Routers require specific environmental operating conditions. Temperature,
humidity, altitude, and vibration can affect the performance and reliability of the router. The following
sections provide specific information to help you plan for the proper operating environment.
humidity, altitude, and vibration can affect the performance and reliability of the router. The following
sections provide specific information to help you plan for the proper operating environment.
The Cisco ASR1000 Series Routers are designed to meet the industry EMC, safety, and environmental
standards described in the Regulatory, Safety, and Compliance Information for Cisco ASR 1000 Series
Aggregation Services Routers document.
standards described in the Regulatory, Safety, and Compliance Information for Cisco ASR 1000 Series
Aggregation Services Routers document.
Site Environmental Requirements
Environmental monitoring in the Cisco ASR1000 Series router protects the system and components from
damage caused by excessive voltage and temperature conditions. To ensure normal operation and avoid
unnecessary maintenance, plan and prepare your site configuration before installation. After installation,
make sure the site maintains the environmental characteristics as shown in
damage caused by excessive voltage and temperature conditions. To ensure normal operation and avoid
unnecessary maintenance, plan and prepare your site configuration before installation. After installation,
make sure the site maintains the environmental characteristics as shown in
.
Physical Characteristics
Be familiar with the physical characteristics of the Cisco ASR 1000 Series Router to assist you in placing
the system in the proper location.
the system in the proper location.
Table 3-3
Cisco ASR 1000 Series Router Environmental Tolerances
Environmental Characteristic
Minimum
Maximum
Steady State Operating
0 degree C
50 degree C
(50 degrees C at 10,000
feet)
feet)
Storage
–20 degrees C
+70 degrees C
Humidity operating (noncondensing)
10%
90%
Humidity nonoperating (noncondensing)
5%
95%
Altitude operating: over allowable temperature
range (0 to 50 degrees C)
range (0 to 50 degrees C)
–500 feet
10,000 feet
Altitude, nonoperating: over allowable temperature
range
range
–1000 feet
50,000 feet
Thermal shock non-operating with change over time
of 3 minute
of 3 minute
–25 degrees C
+70 degrees C
Thermal Shock - Operating at 2.5 degree C per
minute
minute
0 degrees C
+50 degrees C