Cisco Systems OL-7426-03 Manual De Usuario
5/26/05
Troubleshooting Tips
OL-7426-03
Using Client Reason and Status Codes in the Trap Log
Using Reason and Status Codes in the Trap Log
As described in Web User Interface Online Help, the Clients > Detail page lists the Reason and Status
Codes you are likely to encounter when reviewing the Trap Logs. For your convenience the Reason and
Status Codes and their descriptions are listed in the following sections:
Codes you are likely to encounter when reviewing the Trap Logs. For your convenience the Reason and
Status Codes and their descriptions are listed in the following sections:
•
•
Client Reason Codes
Client Reason Codes
The Client Reason code may be any of the following:
COLD_START
Cisco Wireless LAN Controller may have been
rebooted.
rebooted.
WARM_START
Cisco Wireless LAN Controller may have been
rebooted.
rebooted.
Table -
Client Reason Code Descriptions and Meanings
Client
Reason
Code
Description
Meaning
0
noReasonCode
normal operation
1
unspecifiedReason
client associated but no longer authorized
2
previousAuthNotValid
client associated but not authorized
3
deauthenticationLeaving
the Cisco 1000 Series lightweight access point
went offline, deauthenticating the client
went offline, deauthenticating the client
4
disassociationDueToInactivity
client session timeout exceeded
5
disassociationAPBusy
the Cisco 1000 Series lightweight access point is
busy, performing load balancing, for example
busy, performing load balancing, for example
6
class2FrameFromNonAuthStation
client attempted to transfer data before it was
authenticated
authenticated
7
class2FrameFromNonAssStation
client attempted to transfer data before it was
associated
associated
8
disassociationStaHasLeft
Operating System moved the client to another
Cisco 1000 Series lightweight access point using
non-aggressive load balancing
Cisco 1000 Series lightweight access point using
non-aggressive load balancing
9
staReqAssociationWithoutAuth
client not authorized yet, still attempting to
associate with an Cisco 1000 Series lightweight
access point
associate with an Cisco 1000 Series lightweight
access point
99
missingReasonCode
client momentarily in an unknown state
Table -
Error Messages and Descriptions (Continued)
Error Message
Description