Cisco Systems 2600XM Series Manual De Usuario
14
Step 3
Attach the ground lug or ring terminal to the chassis as shown in Figure 10 or Figure 11. For the ground lug, use the
two screws with captive locking washers provided. For a ring terminal, use one of the screws provided. Use a number 2
Phillips screwdriver, and tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).
two screws with captive locking washers provided. For a ring terminal, use one of the screws provided. Use a number 2
Phillips screwdriver, and tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).
Figure 10
NEBS-Compliant Chassis Ground Connection Using Ground Lug
Figure 11
Chassis Ground Connection Using Ring Terminal
Step 4
Connect the other end of the ground wire to a grounding point at your site.
4
Connect Cables
Warning
Do not work on the system, or connect or disconnect cables during periods of lightning activity. Statement 1001
Warning
Before opening the chassis, disconnect the telephone-network cables to avoid contact with telephone-network
voltages. Statement 1004
voltages. Statement 1004
System Management Connections
Table 1
System Management Connections
Port
Color
Connected To:
Cable
Console
Light blue PC or ASCII terminal communication port (usually labeled COM)
RJ-45-to-DB-9 adapter cable
Auxiliary
Black
Modem for remote access
RJ-45-to-DB-25 adapter cable
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2T
Cisco 2611
100-240V– 1A
50/60 Hz 47 W
W0
AUX
CONSOLE
ETHERNET 0 ACT
LINK
ACT
ETHERNET 1
LINK
W1
36454
Ground lug
103057
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2T
Cisco 2611
100-240V– 1A
50/60 Hz 47 W
W0
AUX
CONSOLE
ETHERNET 0 ACT
LINK
ACT
ETHERNET 1
LINK
W1
Ring terminal