Cisco Systems 247933900 Manual De Usuario

Maintaining and Monitoring

Linksys EA-Series

Whenever you restart the router, all logs that are not saved will be 

lost.

1.  With your router connected to power and turned on, press and hold the 

Reset button on the bottom of your router for 5-15 seconds.

1.  Log into the browser-based utility (see “How to open the browser-based 

utility” on page 20). 

2.  Click the Administration tab, then click the Factory Defaults page.

3.  Click Restore Factory Defaults.

A confirmation window opens. 

4.  Click oK.

Why would I need to upgrade my router’s firmware? Linksys may periodically 

publish a firmware upgrade either to fix a problem or to add features to your 

router. 

Do not interrupt the upgrade process. You should not turn off the 

router or press the Reset button during the upgrade. Doing so may 

permanently disable the router.

If you are upgrading from a laptop computer, make sure that the 

laptop is connected to a power source or that the battery is fully 

charged.

Disable your computer’s Sleep mode. It might interrupt the 

upgrade process.

If you are upgrading from a computer with a wireless network 

connection, make sure that you have strong wireless signal 

strength. If not, move your computer closer to your router.

Each time you run Cisco Connect, it checks for software updates 

and installs them, if available. Use the following instructions only if 

you don’t run Cisco Connect.