Cisco Systems 247933900 Manual De Usuario

Maintaining and Monitoring

Linksys EA-Series

3.  Click  the  Status  tab,  then  click  the  Local  Network  page.  Your  local 

network’s  IP  address  information  and  the  DHCP  server  settings  are 

displayed. (Screen from IPv6-enabled router shown.)

4.  Click DHCP Client Table to display the currently assigned IP addresses.

5.  Click the Status tab, then click the Wireless Network page. Your wireless 

network status is displayed. 

6.  Click the Status tab, then click the Ports page. The link status and speed 

for each of the Ethernet ports and the Internet port are displayed. 

Why would I want to disable the Ethernet port status lights? Depending 

on the placement of the router in a home, some users might find the lights 

distracting. You can easily disable the lights using Cisco Connect, but you can 

also disable them using the browser-based utility.

To disable the lights using Cisco Connect:
1.  In Windows, click Start, All Programs, then click Cisco Connect. 

– OR –
On a Mac, open the Applications folder, then click Cisco Connect.
The Cisco Connect main menu opens.

2.  Under Router Settings, click Change.
3.  Under Port lights, click off, then click Finish.

1.  Log into the browser-based utility (see “How to open the browser-based 

2.  Click the Setup tab, then click the Basic Setup page.
3.  Set Rear Port Lights to off, then click Save Settings at the bottom of 

the page.