Cisco Systems OL-7396-01 Manual De Usuario
11-61
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 11
Configuring ATM Routing and PNNI
PNNI Connection Trace
Example
is an example of an ATM PNNI network used to display the trace connection initialization.
Figure 11-4 PNNI Connection Trace Network Example
The following example initiates a trace connection on an ATM interface:
Switch_10# atm pnni trace connection interface ATM 1/0/2 direction incoming vpi 0 vci 136
endpt-reference 6 call-reference-trace connection-id-trace age-timeout none
Request accepted - request index: 20
Switch_10#
Note
You can use the request index number displayed in the configuration message to display the specific
connection trace for this interface.
connection trace for this interface.
If the request is not accepted, an error message similar to one of the following appears:
%Request not accepted: 5 requests already active
%Request not accepted: Max (100) requests already stored
%Request not accepted: Invalid parameter values
Displaying the Connection Trace Output
This section describes how to display PNNI connection trace output information.
To display the PNNI connection trace output, use the following command:
Connection trace
started at ATM 1/0/2
Router_1
68147
Router_2
Switch_10
Switch_9
Switch_8
Switch_5
Switch_3
Switch_6
Command
Purpose
show atm pnni trace connection {all |
index-number [detail | summary]}
[hex-only]
index-number [detail | summary]}
[hex-only]
Displays the PNNI connection trace output.