Cisco Systems OL-7396-01 Manual De Usuario

—ELAN name: eng_elan
—Default ELAN name: eng_elan
—ATM address: 47.00918100000000E04FACB401.00E04FACB403.01

LANE Client:
—Location: ATM_Switch
—Interface/Subinterface: atm 0.1
—Server/BUS name: eng_elan
—IP Address/Subnet mask: 172.16.0.4 255.255.0.0
—Type: Ethernet

LANE Client:
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Server/BUS name: eng_elan
—Type: Ethernet

LANE Client:
—Location: Router_1
—Interface/Subinterface: atm 3/0.1
—Server/BUS name: eng_elan
—IP Address/Subnet mask: 172.16.0.1 255.255.0.0
—Type: Ethernet

Virtual LANs (VLANs) need to be configured on the LAN edge switches. These VLANs must be 
mapped to the appropriate ELANs.

Continue with the following sections to start configuring LANE on your ATM network.

To make configuration easier, you should display the LANE default addresses for each router or switch 
router that is running any of the LESs or services and write down the displayed addresses on your 
worksheet.

To display the default LANE addresses, use the following EXEC command:

The following example displays the default LANE addresses:

Switch# show lane default-atm-addresses

interface ATM13/0/0:

LANE Client:        47.00918100000000E04FACB401.00E04FACB402.**

LANE Server:        47.00918100000000E04FACB401.00E04FACB403.**

LANE Bus:           47.00918100000000E04FACB401.00E04FACB404.**

LANE Config Server: 47.00918100000000E04FACB401.00E04FACB405.00

note: ** is the subinterface number byte in hex

Displays the LANE default addresses for all 
ATM interfaces present on the router or 
switch router.