Cisco Systems OL-7396-01 Manual De Usuario
14-5
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 14
Configuring LAN Emulation
LANE Configuration Tasks
Example LANE Plan and Worksheet
This section is an example of the LANE plan and worksheet that would be created for the example
network configuration described in
network configuration described in
Note
This example configures LANE on the route processor interface (ATM 0), rather than an ATM router
module interface. For LANE client configuration examples on ATM router module interfaces, see
module interface. For LANE client configuration examples on ATM router module interfaces, see
Figure 14-2 LANE Plan Example Network
The following information describes the LANE plan in
•
LECS:
—Location: ATM_Switch
—Interface: atm 0
—ATM address: 47.00918100000000E04FACB401.00E04FACB405.00
—Location: ATM_Switch
—Interface: atm 0
—ATM address: 47.00918100000000E04FACB401.00E04FACB405.00
•
LES:
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Type: Ethernet
—ATM address: 47.00918100000000E04FACB401.00E04FACB403.01
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Type: Ethernet
—ATM address: 47.00918100000000E04FACB401.00E04FACB403.01
•
BUS:
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Type: Ethernet
—ATM address: “use default”
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Type: Ethernet
—ATM address: “use default”
•
Database:
—Location: ATM_Switch
—Name: eng_dbase
—Location: ATM_Switch
—Name: eng_dbase
Switch 1
LEC, LES/BUS
ATM switch
LECS, LEC
Router 1
LEC
172.16.0.0
5000
atm 0.1
172.16.0.3
main-atm 0.1
172.16.0.4
atm 3/0.1
172.16.0.1
172.16.0.1
26168