Cisco Systems OL-7396-01 Manual De Usuario
15-7
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 15
Configuring ATM Accounting, RMON, and SNMP
Configuring ATM Accounting
Configuring ATM Accounting Files
Direct the ATM accounting data being gathered from the configured selection control table to a specific
ATM accounting file. To configure the ATM accounting files and change to ATM accounting file
configuration mode, perform the following tasks, beginning in global configuration mode:
ATM accounting file. To configure the ATM accounting files and change to ATM accounting file
configuration mode, perform the following tasks, beginning in global configuration mode:
Note
Only one ATM accounting file can be configured and that file cannot be deleted.
Examples
The following example shows how to enable ATM accounting file configuration mode for acctng_file1
and reconfigure the collection mode on release of a connection:
and reconfigure the collection mode on release of a connection:
Switch(config)# atm accounting file acctng_file1
Switch(config-acct-file)# collection-mode on-release
The following example shows how to enable ATM accounting file configuration mode for acctng_file1
and reconfigure the minimum age to the default value:
and reconfigure the minimum age to the default value:
Switch(config)# atm accounting file acctng_file1
Switch(config-acct-file)# default min-age
The following example shows how to enable ATM accounting file configuration mode for acctng_file1
and configure a short description to be displayed in the show atm accounting file display and the file
header:
and configure a short description to be displayed in the show atm accounting file display and the file
header:
Switch(config)# atm accounting file acctng_file1
Switch(config-acct-file)# description Main accounting file for engineering
The following example shows how to enable ATM accounting file configuration mode for acctng_file1:
Switch(config)# atm accounting file acctng_file1
Switch(config-acct-file)# enable
Command
Purpose
Step 1
Switch(config)# atm accounting file acctng_file1
Switch(config-acct-file)#
Specifies the ATM accounting file and enters
accounting file configuration mode.
accounting file configuration mode.
Step 2
Switch(config-acct-file)# collection-modes
[on-release] [periodic]
[on-release] [periodic]
Configures when to write to the accounting file.
Step 3
Switch(config-acct-file)# default [min-age]
Resets the ATM accounting file configuration to
the default.
the default.
Step 4
Switch(config-acct-file)# description string
Configures a short description for the ATM
accounting file.
accounting file.
Step 5
Switch(config-acct-file)# enable
Enables ATM accounting for a specific file.
Step 6
Switch(config-acct-file)# failed-attempts [none]
[regular] [soft]
[regular] [soft]
Configures whether to record failed connection
attempts.
attempts.
Step 7
Switch(config-acct-file)# interval seconds
Configures the interval for periodic collection, in
seconds.
seconds.
Step 8
Switch(config-acct-file)# min-age seconds
Configures the ATM accounting file minimum
age of the VC.
age of the VC.