Cisco Systems OL-7396-01 Manual De Usuario

To configure the behavior of the buffers used for ATM accounting collection, use the following command 
in privileged EXEC mode:

The following example specifies that all VCs that meet the minimum age requirement should be 
collected:

Switch# atm accounting collection collect-now accntg_file1

The following example swaps the buffers used to store accounting records; the old buffer is now ready 
to download:

Switch# atm accounting collection swap acctng_file1

To display the ATM accounting file configuration status, use the following EXEC command:

The following example shows the ATM accounting status using the show atm accounting files EXEC 
command:

Switch# show atm accounting

ATM Accounting Info:     AdminStatus - UP;      OperStatus : DOWN

Trap Threshold - 90 percent (4500000 bytes)

Interfaces:

File Entry 1: Name acctng_file1

    Descr: atm accounting data

    Min-age (seconds): 3600

    Failed_attempt : C0

No file buffers initialized

selection Entry -

    Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1

    Selection entry 1, list - FF.FE.BF.FC

    Selection entry 1, connType - F0.00

Active selection -

    Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1

    Selection entry 1, list - FF.FE.BF.FC

    Selection entry 1, connType - F0.00

<Information deleted>

atm accounting collection {collect-now | 
swap} filename

Configures the ATM accounting data 
collection.

Displays the ATM accounting status.