Cisco Systems OL-7396-01 Manual De Usuario
15-16
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 15
Configuring ATM Accounting, RMON, and SNMP
Configuring ATM RMON
Displaying the ATM RMON Port Select Group
To display the ATM RMON port select group statistics, use the following EXEC command:
Example
The following example shows how to display the configuration of port selection group 3 using the
show atm rmon stats command from EXEC mode:
show atm rmon stats command from EXEC mode:
Switch# show atm rmon stats 3
PortSelGrp: 3 Collection: Enabled Drops: 0
CBR/VBR: calls: 0/0 cells: 0 connTime: 0 days 00:00:00
ABR/UBR: calls: 0/0 cells: 0 connTime: 0 days 00:00:00
Configuring Interfaces into a Port Select Group
Before the port selection group can begin gathering host and matrix connection information, an interface
or group of interfaces must be added to the port selection group.
or group of interfaces must be added to the port selection group.
To configure an interface to an ATM RMON port selection group, perform the following steps,
beginning in global configuration mode:
beginning in global configuration mode:
Example
The following example shows how to configure ATM interface 0/1/3 to ATM RMON port selection
group 6:
group 6:
Switch(config)# interface atm 0/1/3
Switch(config-if)# atm rmon collect 6
Displaying the Interface Port Selection Group Configuration
To display the ATM RMON port configuration status, use the following EXEC command:
Command
Purpose
show atm rmon stats number
Displays the ATM RMON port select group
statistics.
statistics.
Command
Purpose
Step 1
Switch(config)# interface atm card/subcard/port
Switch(config-if)#
Selects the interface to be configured.
Step 2
Switch(config-if)# atm rmon collect
port_sel_group
port_sel_group
Configures the interface to an ATM RMON port
selection group.
selection group.
Command
Purpose
show atm rmon {host number |
matrix number | stats number | status}
matrix number | stats number | status}
Displays the interface port selection group
configuration.
configuration.