Cisco Systems OL-7396-01 Manual De Usuario
15-14
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 15
Configuring ATM Accounting, RMON, and SNMP
Configuring ATM RMON
The following example shows the remote logging configuration using the show atm accounting EXEC
command:
command:
Switch# show atm accounting
ATM Accounting Info: AdminStatus - UP; OperStatus : UP
Trap Threshold - 90 percent (4500000 bytes)
Interfaces:
AT1/0/0
AT2/0/0
File Entry 1 -
Name: acctng_file1
Descr: atm accounting data
Min-age (seconds): 0
Failed_attempt : soft regular
Interval (seconds) : 60
Collect Mode : on-release periodic
Sizes: Active 68 bytes (#records 0); Ready 74 bytes (#records 0)
Remote Log and local storage are enabled.
Primary Log Host: eagle, TCP listen port: 2001, OperStatus: DOWN
Alternate Log Host: eagle, TCP listen port: 2002, OperStatus: DOWN
Selection Entry 1 -
Subtree OID : 1.3.6.1.4.1.9.10.18.1.1
List Bitmap : FF.FE.BF.FC
Conn Type : svc-in svc-out pvc pvp spvc-originator spvc-target
Active List Bitmap - FF.FE.BF.FC
Configuring ATM RMON
This section describes the process you use to configure ATM RMON on the ATM switch router. The
following sections describe the process:
following sections describe the process:
•
•
•
•
•
•
RMON Overview
The ATM RMON feature allows you to monitor network traffic for reasons such as fault monitoring or
capacity planning. The ATM RMON feature is an extension of an existing, well-known RMON standard
and provides high-level per-host and per-conversation statistics in a standards-track MIB similar to the
following RMON MIBs:
capacity planning. The ATM RMON feature is an extension of an existing, well-known RMON standard
and provides high-level per-host and per-conversation statistics in a standards-track MIB similar to the
following RMON MIBs:
•
RMON-1 MIB—RFC 1757
•
RMON-2 MIB—RFC 2021 and 2074
The ATM-RMON counter uses the per-VC counters already maintained in the hardware and polled by
the software. The ATM RMON agent can report cell traffic statistics by monitoring connection
management activity. At connection setup and release time, some ATM-RMON bookkeeping code is
executed. The amount of information varies, depending on the ATM RMON configuration. The
ATM-RMON bookkeeping capability significantly reduces the processing requirements for
ATM-RMON, and allows collecting statistics on many or all the of ATM switch router ports at once.
the software. The ATM RMON agent can report cell traffic statistics by monitoring connection
management activity. At connection setup and release time, some ATM-RMON bookkeeping code is
executed. The amount of information varies, depending on the ATM RMON configuration. The
ATM-RMON bookkeeping capability significantly reduces the processing requirements for
ATM-RMON, and allows collecting statistics on many or all the of ATM switch router ports at once.