Cisco Systems OL-7396-01 Manual De Usuario
17-4
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 17
Configuring Signalling Features
Configuring E.164 Addresses
•
When you configure atm svc-frame-discard-on-aal5ie, frame discard is installed if the AAL5
information element is present.
information element is present.
•
When you configure no atm svc-frame-discard-on-aal5ie, frame discard is installed on UNI 4 or
PNNI interfaces if explicitly requested by the SETUP and CONNECT messages.
PNNI interfaces if explicitly requested by the SETUP and CONNECT messages.
Example
In the following example, the ATM switch router behavior is set to not use the AAL5 information
element to dictate frame discard.
element to dictate frame discard.
Switch(config)# no atm svc-frame-discard-on-aal5ie
Displaying the ATM Frame Discard Configuration
To display the ATM frame discard configuration, use the following privileged EXEC command:
Example
The following example shows how to display the frame discard configuration:
Switch# more system:running-config
Building configuration...
Current configuration:
!
version XX.X
no service pad
service udp-small-servers
service tcp-small-servers
!
hostname Switch
!
network-clock-select 1 ATM0/0/0
network-clock-select 4 ATM0/0/0
ip host-routing
no atm svc-frame-discard-on-aal5ie
!
<information deleted>
Configuring E.164 Addresses
E.164 support allows networks that use network service access point (NSAP) ATM addresses formats
(for example, 45.000001234567777F00000000.000000000000.00) to work with networks that use
E.164 address formats (for example, 1–123–456–7777). For an overview of address types and E.164
subtypes, refer to the Guide to ATM Technology.
(for example, 45.000001234567777F00000000.000000000000.00) to work with networks that use
E.164 address formats (for example, 1–123–456–7777). For an overview of address types and E.164
subtypes, refer to the Guide to ATM Technology.
Command
Purpose
more system:running-config
Displays the frame discard configuration.