Cisco Systems OL-7396-01 Manual De Usuario
21-11
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 21
Configuring IMA Port Adapter Interfaces
Configuring IMA Group Functions
Confirming the Interface Deletion
To confirm the interface deletion from the IMA group, use the following EXEC command:
Example:
The following example shows how to verify that the interface is deleted from the IMA group:
SwitchA# show ima interface atm 0/0/1
ATM0/0/1 is not a part of IMA group
Deleting an IMA Group
To delete an IMA group, use the following global configuration command:
Note
When you delete an IMA group, the interfaces remain configured as members of the IMA group. When
you recreate the IMA group, the member interfaces reinitialize automatically.
you recreate the IMA group, the member interfaces reinitialize automatically.
Example
The following example shows how to delete ATM interface 0/0/ima1 and administratively shut down the
member interfaces:
member interfaces:
Switch(config)# no interface atm 0/0/ima1
Confirming the IMA Group Deletion
To confirm the IMA group deletion, perform the following steps in user EXEC mode:
Example
The following example shows how to verify that the interface is deleted from the IMA group:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# interface atm 0/0/2
Switch(config-if)# shut
Command
Purpose
show ima interface atm card/subcard/port
Displays IMA group interface configuration
and status.
and status.
Command
Purpose
no interface atm card/subcard/imagroup Deletes the IMA group from the T1/E1
IMA interface.
Command
Purpose
show ima interface [atm card/subcard/imagroup
[detailed]]
[detailed]]
Displays IMA group interface configuration
and status.
and status.