Cisco Systems OL-7396-01 Manual De Usuario

3-21

ATM Switch Router Software Configuration Guide

OL-7396-01

Chapter 3

Initially Configuring the ATM Switch Router

Configuring Online Diagnostics (Catalyst 8540 MSR)

To configure online diagnostics, use the following global configuration commands:

Examples

The following example shows how to enable all online diagnostic tests:

Switch(config)# diag online

ONLINE-DIAG: Enabling all Online Diagnostics tests

The following example shows how to change the frequency of the access test to 20 seconds:

Switch(config)# diag online access freq 20

ONLINE-DIAG: Online Access Test Frequency set to 20 sec

Displaying the Online Diagnostics Configuration and Results (Catalyst 8540 MSR)

To display the online diagnostics configuration and results, use the following EXEC command:

Command

Purpose

diag online

Enables all of the online diagnostic tests.

diag online access

Enables only the access diagnostic test.

diag online access freq [seconds]

Configures the frequency of the access diagnostic
tests. The default frequency is every 10 seconds.

diag online oir

Enables only the OIR test.

diag online oir pktsize [bytes]

Specifies the packet size for the OIR test. The
default size is 1000 bytes.

diag online snake

Enables only the snake test.

diag online snake timer [seconds]

Specifies the time interval for the snake test. The
default interval is 60 seconds.

no diag online [access | oir | snake]

Disables the online diagnostic tests.

debug diag online [access | oir | snake]

Enables debugging of online diagnostic tests.

no debug diag online [access | oir | snake]

Disables debugging of online diagnostic tests.

Command

Purpose

show diag online [details | status] [access | oir |
snake]

Displays information about the online
diagnostics test configuration and the test results.