Cisco Systems OL-7396-01 Manual De Usuario
3-23
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 3
Initially Configuring the ATM Switch Router
Configuring SNMP and RMON
The following example shows how to display the details and status of the snake test:
8540MSR#show diag online snake
======== Online Snake Test Status and Details ========
-------- Test Status --------
Current Test Status : Test is Enabled
Current Test Type : Normal Snake
Last Test Status : Pass
Last Test Run Time : 1w1d
Last Test Success Time : 1w1d
-------- Test Details --------
Snake Test Pkt Size : 30 bytes
Default Test Period : 60 seconds
Current Test Period : 60 seconds
----------------------------------
Statistics from Bootup
----------------------------------
Total Test Runs : 17311
Number Normal Snake Test Runs : 17311
Number of Successive Normal Snake Test : 14083
Number of Incrimental Snake Test Runs : 0
------------------------------------------
Ports Test Stat in Last Iteration
------------------------------------------
Port Card Type Result Test Time
_______ ________________ __________ _________
09/0/00 OC48c PAM PORT_OK 1w1d
10/0/00 QUAD 622 Generic PORT_OK 1w1d
11/0/00 OC48c PAM PORT_OK 1w1d
12/0/00 QUAD 622 Generic PORT_OK 1w1d
-----------------------------------------
Ports Failed Stat from Bootup
-----------------------------------------
No Port failed from Bootup
Configuring SNMP and RMON
SNMP is an application-layer protocol that allows an SNMP manager, such a network management
system (NMS), and an SNMP agent on the managed device to communicate. You can configure
SNMPv1, SNMPv2, or both, on the ATM switch router. Remote Monitoring (RMON) allows you to see
the activity on network nodes. By using RMON in conjunction with the SNMP agent on the ATM switch
router, you can monitor traffic through network devices, segment traffic that is not destined for the ATM
switch router, and create alarms and events for proactive traffic management.
system (NMS), and an SNMP agent on the managed device to communicate. You can configure
SNMPv1, SNMPv2, or both, on the ATM switch router. Remote Monitoring (RMON) allows you to see
the activity on network nodes. By using RMON in conjunction with the SNMP agent on the ATM switch
router, you can monitor traffic through network devices, segment traffic that is not destined for the ATM
switch router, and create alarms and events for proactive traffic management.
For detailed instructions on SNMP and general RMON configuration, refer to the Configuration
Fundamentals Configuration Guide. For instructions on configuring ATM RMON, refer to
Fundamentals Configuration Guide. For instructions on configuring ATM RMON, refer to