Cisco Systems OL-8241-02 Manual De Usuario
Chapter 2 Configuring Spanning-Tree Bridging for the CSS
Showing Bridge Configurations
2-6
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
To disable spanning-tree bridging, enter:
(config)# bridge spanning-tree disable
To reenable spanning-tree bridging, enter:
(config)# bridge spanning-tree enable
Showing Bridge Configurations
Use the show bridge forwarding command to display bridge forwarding
information.
information.
describes the fields in the show bridge forwarding
command output.
Use the show bridge status command to display bridge status information.
describes the fields in the show bridge status output.
Table 2-2
Field Descriptions for the show bridge forwarding Command
Field
Description
VLAN
The bridge interface virtual LAN number
MAC Address
The MAC address for the entries
Port Number
The port number used for bridge forwarding
Table 2-3
Field Descriptions for the show bridge status Command
Field
Description
STP State
The state of the Spanning-Tree Protocol: Enabled or
Disabled.
Disabled.
Root Max Age
The timeout period, in seconds, during which the host times
out root information.
out root information.
Root Hello Time
The interval, in seconds, during which the root bridge
broadcasts its hello message to other devices.
broadcasts its hello message to other devices.
Root Fwd Delay
The delay time, in seconds, that the root bridge uses for
forward delay.
forward delay.
Designated Root
The bridge ID for the designated root.