Cisco Systems 1000 Series Manual De Usuario
19-3
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19 Cisco ASR 1000 VxLAN Support
Prerequisites for Cisco ASR 1000 Series Routers VxLAN Support
Prerequisites for Cisco ASR 1000 Series Routers VxLAN Support
The following are the prerequisites to configuring the Cisco ASR 1000 Routers as a VxLAN Layer 2
gateway:
gateway:
1.
Configure the loopback interface.
2.
Configure the IP unicast reachability to remote VTEP's.
3.
Configure Bidirectional Protocol Independent Multicast (PIM).
For more information, see the
.
Configuring the Cisco ASR 1000 Routers as a VxLAN Layer 2
Gateway with Multicast
Gateway with Multicast
•
•
•
•
Configuring the VxLAN UDP Destination Port (Optional)
The default VxLAN UDP destination is 8472. If you want to change the VxLAN UDP destination port
value, you must change it before configuring the network virtualization endpoint (NVE) interface.
value, you must change it before configuring the network virtualization endpoint (NVE) interface.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
vxlan udp port number